Hands Off Blade Adjustment
- Extended Knife Life - Knife advancement to a new cutting edge is made automatically, based on the number of cuts input by the operator.
- Improved Safety - Operator handles the knife only for blade replacement.
- Lower Operating Costs - Reduced knife consumption and less down-time for knife changes means you're cutting cores and costs.
The operator sets the cycle counter based on your experience with the cores you regularly cut. The indexer will advance the knife 3/16" on its circumference each time the count is reached. Should a knife be prematurely damaged, the operator can signal an advance to the new edge. The only time the operator handles the knife is when it has indexed a full revolution and needs replacement. This counter can be panel installed in new cutters, or provided as an "add-a-panel" kit for core cutters already in service.
We provide retro-fit kits for all models of Appleton Core Cutters. A control panel is mounted to the cutter frame, the knife holder is swapped out and air and electrical connections made per the included instructions. All parts and fittings are included. PLC controlled units may require a program upgrade. The conversion takes between one and four hours dependent on core cutter model.
Quickly Change Diameters Without Changing Mandrels
Appleton's patented Instant Diameter Change (IDC) Mandrel System provides a multiple core diameter capability with a single mandrel and interchangeable cartridges.
The IDC system features a mandrel with a heavy duty drive to handle a specific range of diameters. The IDC base mandrel is built to the smallest diameter of each range. Lightweight Sleeves or End Plugs provide support for larger core diameters. The patented IDC cartridge is a pre-assembled unit that includes the head jaws, cone, springs and pad mounting cup. The components are optimally adjusted, requiring only that the operator slide the assembly onto the pull rod and secure it with the quick release pin.
Fits all Universal Models
This system will fit existing S200 and S210 Semi-Automatics, A300 and A301 Automatic Core Cutters, A350, A360, A400 Hydraulic Core Cutters, P500 and P510 Programmable Core Cutters (programmable cutters may require program changes). Note that an IDC base mandrel is required for the IDC cartridges.
* With modifications the Instant Diameter Change System(IDC) can be added to most Pre-Universal Appleton Core Cutters such as Model(s) BI, D, S or others. Contact Appleton Mfg. Division to verify availability.
Base Mandrel Diameter Range
- 1.875" ≈ 1.875" - 2.999" with diameter specific IDCs
- 3" ≈ 3.000" - 7.999" with diameter specific IDCs
- 6" ≈ 5.999" - 12.999" with diameter specific IDCs
- 6" HD ≈ 5.999" - 20.999" with diameter specific IDCs
Eliminate a Source of Cut Length Error
This high-precision electronic device has a digital display unit and linear scale which eliminate visual measurement guesswork, and reduce machine setup time. The display can be easily switched to provide output in decimal inch, millimeters or fractions (1/16, 1/32, 1/64).
Digital Readout for New or Existing Core Cutters
- Current model S210 Semi-Automatic, A301 Automatic, and A400 Automatic
- Recent model S200 Semi-Automatic, A300 Automatic, A350 Automatic and A360 Automatic
- As well as most older model "S" and "D" Cutters
This 4 hour procedure requires that the target tube be removed, holes drilled, and the scale mounted. Tube supports in the cutter frame are also removed, holes drilled for brackets and the digital display mounted. The wiring is straight-forward as the Digital Readout is battery powered.
Replacement for Sheet Steel Hoods
- Made from lightweight, durable ABS Plastic
- Weighs in at approximately 20lbs
- Fits pre-existing Universal Series (S200, A300, A400, P500) Appleton Core Cutters
Approximately a 40lb difference in weight between the sheet steel hoods and the ABS Plastic Hoods.
Enhanced Knife Guarding
For Appleton Model D, BI and S Core Cutters
This retro fit improves the knife guarding mechanism on pre-universal series Appleton Mfg. Division core cutters. The newer Universal series core cutters were designed to provide an area guard to protect the operator during cutting operations and a fixed guard for additional protection during mandrel changes.
The New Guard Provides
- Full Knife Coverage
- A Maintenance Lock
- Easy Installation
- No Change in Operation
- Low Cost Protection
Enhanced Knife Guard Kit Includes
- Knife Bar
Previous Knife Configurations that Enhanced Knife Guarding Replaces
Previous Style Knife on BI Models Previous Style Knife on D Models
Enanced Knife Guarding Installs Easily
The guard covers the entire knife. Only the portion actually engaged in the core wall is unsheathed as needed. The maintenance lock is easily engaged, ensuring operator protection during mandrel or cutting pad changes.
Knife Air Assisted Conversion
Retro Fit for Model S Core Cutter from Appleton Mfg. Division
This retro fit option adds the functionality of a powered knife, full range knife adjustment and operator foot pedal to Model S Appleton core cutters.
Benefits of Installing the Model S Retro Fit
- Faster Diameter Changes - The knife assembly slides in or out to adjust for changes in core diameter.
- Full Range Knife Adjustment - The new knife base permits two-axis adjustment of the knife. The first axis offers taper adjustment and the second axis permits the knife to be tilted on its vertical plane.
- Better Cuts - The air assisted knife quickly powers the knife through the core. Your operator no longer has to stand on a lever to force the knife through the core.
- Improved Safety - The new knife assembly is double guarded. The clear plastic outer guard defines the cutting zone and the inner P-guard covers the knife in the parked position.
Easy to Install - The assembly comes with complete mounting instructions, making installation a snap.